An acrylic floor sealer formulated to provide a hard, durable undercoat for use prior to the application of any floor finish. Never yellows and will continue to protect your floor after all floor finish has worn off. Provides chemical and stain resistance and is for use on any type of hard surface.
A styrene free, extremely durable sealer/finish designed especially for stone floors. Levels and adheres to terrazzo, quarry tile, brick, slate, stone, Mexican tile, and all other non-resilient floors. Leaves these surfaces with a durable, high quality, long lasting, protective coating. The styrene free formula allows the finish to dry clear, seals, and protects the beauty of stone floors.
A semi-permanent, metal cross-linked acrylic, stain resistant sealer. This product is for use on resilient tile, terrazzo, indoor concrete, and all other hard surfaces. It will resist asphalt, coal tar, betadine, neozone (the anti-oxidant in floor mats), mustard, ketchup, coffee, dye, lipstick, rust, and quaternary disinfectants. Will not be removed when stripping with conventional floor strippers, thus saving product and labor.
Viper Premium Grout And Stone Sealer
Your customers absolutely want you to seal stone, tile and grout floors after you clean them. It just goes together like a hamburger and fries! Premium Grout and Stone Sealer is a professional grade, water-based sealer far superior to "Home Center" products. It can even be used on damp grout right after you clean! It will protect stone, tile and grout from oil and water based-spills and dry soils. It penetrates deeply to offer the very best protection and won’t leave a "skin" to wear off like other sealers. It's effective on all grout and on absorbent and semi-absorbent stone and tile. Spray it on or apply it with the Injectimate Grout Sealing Kit. Grout is stronger when protected with this durable sealer.
A protective acrylic coating, for curing and sealing new and old concrete surfaces. This water based coating can be used for interior and exterior applications. Protects against grease, dirt, chemicals, and stains. Fast drying with no solvent fumes makes this an ideal product for use in closed areas. Curing membrane performance meets ASTM C-156 requirements.
A protective acrylic coating, for curing and sealing old non-resilient hard surfaces, such as concrete, terrazzo, brick, un-glazed ceramic tile, slate or other stone surfaces. This water based coating should be used for interior applications only. Protects against grease, dirt, chemicals, and stains. Fast drying with no solvent fumes makes this an ideal product for use in closed areas.
A ready-to-use, water based, penetrating sealer for use on porous mineral surfaces such as stone, brick, concrete, cement, terra cotta, unglazed tile, and grout. By creating a transparent subsurface barrier which gives water and oil repellency, it makes the surface stain resistant. This allows for easy cleanup of most spills and quicker dry times. It is non-yellowing for long lasting interior/exterior applications. This subsurface sealer provides durable protection without leaving a visible film, allowing the natural beauty of the stone to show.
Prime Time WF
A 100% oil-modified urethane wood finish dispersed in water with characteristics equal to and often surpassing those of conventional solvent coatings. Specifically designed to be used on sports, commercial, and residential floors where demands for low odor and VOC compliance are specified. Fast air drying film allows multiple coats daily. Produces a crystal clear film with exceptional gloss. It is compatible over a wide variety of conventional solvent based and water based urethane and epoxy coatings (provided that these coatings are cured, bonded and the floor is properly prepared. Not compatible over acrylic floor finishes). In addition, NO catalyst is required (this product cures via oxidation - like conventional oil-modified urethanes) to produce a finish that provides exceptional durability and scuff resistance. Maple Flooring Manufacturers Association (MFMA) certified and approved for use on wood gymnasium floors.
Crystal Cote 350
Oil modified polyurethane finish designed for use on sports, commercial, and residential wood floors. Produces outstanding durability and resistance to scuffs, spills and stains. Leaves surface with an extremely rich gloss that dirt and grime can’t penetrate. This product meets the strict VOC (Volatile Organic Compounds) requirements, which have been established in many states throughout the country. Easy to apply, it is compatible over a wide variety of conventional solvent-based coatings (provided these coatings are cured, bonded and the floor is properly prepared). Manufacturer’s Recommendation: This coating is to be applied without thinning. VOC Content < 350 grams/liter